Welcome, visitor! [ Register | Login

$136.00

Entry Management System Fundamentals

  • Street: 13 Rue Des Six Freres Ruellan
  • City: Sannois
  • State: West Virginia
  • Country: France
  • Zip/Postal Code: 95110
  • Listed: January 11, 2019 1:50 am
  • Expires: 82 days, 10 hours

Description

HubPages»
Technology»
Consumer Electronics by controlling who can enter (or exit) and when they’ll achieve this; and by monitoring the condition of doors and locking hardware.
Here is some access management vocabulary:
Person – somebody who uses the access control system to get in and/or out.
Credential – the id of the user from the system’s viewpoint. Varieties of credentials embrace pin code, magazine stripe card, prox cards and prox keys, and a human characteristic, such as the retina of the attention or fingerprints.
Pin Code – “PIN” stands for Private Identification Number – a series of numbers distinctive to a particular person.
Magazine Stripe Card – (magnetic stripe card) – plastic card with a magnetic strip utilized to one facet. The magnetic strip comprises a code that may be learn by a magnetic stripe card reader.
Prox Card – (proximity card) – plastic card with a transponder chip embedded inside. The transponder communicates with a proximity reader to effect access door control review – https://www.doorsecurity.ca – https://www.doorsecurity.ca – management. A Prox Key (or Prox Fob) is a plastic object containing a transponder chip that can by attached to the consumer’s key ring.
Time Zones – (schedules) – perform of an access control system that controls when sure customers’ credentials might be accepted by the system and when they will not.
Audit Trail – historical past of events recorded by the system, corresponding to time when a credential is introduced, situations of when a door was compelled or propped open, or time when a door is opened for egress.
Entrance End – system user interface on the door that reads the credential and transmits the knowledge to the entry control panel.
Panel – brains of the access management system – receives the information from the entrance and and decides, based mostly on its programming, whether to permit entry.
How It really works
Full featured access control programs work like this:
The system supervisor uses access management software program put in on their pc to set the parameters of the system, that’s, to tell the access management panel what to do and when. Access management software is database software. The records within the database could be customers, credentials, doorways, and times. Using the software, the supervisor can grant or deny individuals or teams of users access to particular doors between sure hours and on sure days. The software can normally file which person accesses which door at what time and other events it what they name an audit trail.
In operation:
The consumer presents their credential.
The reader sends the knowledge to the entry management panel.
The panel compares the information to its programming, “decides” whether to grant or deny the consumer entry, and data the event in memory.
A low voltage power supply powers the system and electric locking devices.
This system may be made up of components primarily based on the building’s electrical system, may be part of the pc network either as units linked directly to the network or linked wirelessly via an interface, or they can be small, self-contained units that accomplish entry control on one door at a time.
Easy methods that control just a few doorways and serve a small numbers of users might provide solely the flexibility so as to add and delete customers. These units have the same form of “brains” that a extra complex system does, but with less capability. These methods are excellent for functions the place audit trail and time zones are unnecessary, but the necessity to be able to deny access to a single person is needed.
Issues
What number of users? How many people will use the system now, and how many might use it in the future? Number of users is the primary standards for choosing an access management system.
What number of doorways? Again, how many doorways may have access control now, and what number of might have access management in the future?
Would you like audit trail functionality? Do you want time zones? Audit path functionality permits the administrator to maintain track of users as they enter the secured space. The system ‘remembers’ when a consumer presents their credential to the system. We’ll focus on credentials shortly. Usually through a pc interface, the administrator can entry and/or print out a list of ‘events’ including authorized entry, forced entry, and door propped open events.
Time zones are blocks of time assigned to users. If Bob Smith works from 9am to 5pm and you don’t need him to come in every other time, time zones help you make Bob’s credential work solely when Bob is authorized to work.
Audit trail and time zone capabilities normally imply that your entry management system will interface with a computer using proprietary software program supplied by the access control system producer. It is feasible to have these features without software, but that often means that the administrator must punch in commands

Loading...
Listing ID: 675c37f66859039

Report problem

Processing your request, Please wait....

Sponsored Links

Leave a Reply

Si prega di attivare i Javascript! / Please turn on Javascript!

Javaskripta ko calu karem! / Bitte schalten Sie Javascript!

S'il vous plaît activer Javascript! / Por favor, active Javascript!

Qing dakai JavaScript! / Qing dakai JavaScript!

Пожалуйста включите JavaScript! / Silakan aktifkan Javascript!
[ Search Classified ]
Better Stop Adblock